How to PACK your RICE PULLER

# Wrap the RP in cotton
# If your RP is small (coin, etc..), take a big soap (optional) used in washing clothes, and cut the soap in half.
* make a hole so that the RP can fit inside easily
* then put the RP inside and bring the 2 soap pieces together
# wrap it in carbon paper with the carbon side facing down (inside)
# wrap it in another carbon paper facing up (outside)
# wrap it in another carbon paper facing down (inside)
# repeat the above a few times
# If your RP is small (coin, etc..), put the above in a condom and then in a polythene bag (a condom is a very good quality rubber) and start testing the packing by putting untested rice as explained 3 steps below
# wrap a soft & thick plastic sheet (polythene) around the above
# wrap it with white sticking tape used by doctors
# now wrap it several times in rubber tyre tube used in cycle/cars/truck (depending on size)
# place this packed piece on a plain wooden surface and sprinkle lots of untested basmati rice on and around it
# wait for half an hour and see if any rice sticks to the packing AND pick a grain of rice and rub it between your fingers and see if it breaks into pieces
# even if one rice grain sticks OR if it breaks into pieces after rubbing between your fingers, add more packing material > carbon papers > plastic sheet > white tape > tyre tube
# again test the packing with untested rice for about half an hour
# if rice does not stick BUT still changes color OR becomes powder (or even in larger pieces) when rubbed between your fingers, then add more packing
# test the packing again
# If rice does not stick, does not change color and also does not become powder, add one more final layer of packing material > carbon papers > plastic sheet > white tape > tyre tube
# finally put it in a wooden box (optional)
# We also recommend doing the Torch Test on your packing.
Now it is ready to store / carry.