TESTS FOR RICEPULLER

Hello Rice Puller Friend's ...
*The following information is true to the best of our knowledge and belief.
*We can buy an item which Purports to display natural (not manmade and not artificially made)Properties mentioned below.
*We reserve the right to refuse to purchase an item with the following properties if we suspect any humanly induced Function.
* SIZE
* WEIGHT
* SHAPE
* CLEANING # Wash the item with any detergent powder and water ( like sruf )
# Wash the item with saline water (salt and water)
# Wash it with plain water and dry it.
# Rub try cotton and newspaper on the item.
# Let the item come to normal room temperature before you begin to test it.
1. STAPLER PIN TEST
Take a small iron stapler pin and bring it near the RP.it should not stick to RP..
( if the pin sticks, then RP is fake)
2. INSTANT PULLING DISTANCE
Get fresh rice from home Preferably fresh dehasked rice.
( Do not use sellers rice as they do gimmicks as they use chemicals kept hidden if fingernails)
keep the rice very near the item for attraction note the time taken and distance pulled and color.
INSTANT PULLING TIME :
Color change : time taken to change color after sticking.
After how much time does the rice fall.
3. RICE TO RICE
Take these tested/dusted rice and place them on aflat surface towards untested rice and check for attraction.
4.(A) GLASS WATER TEST
Fill a non metallic glass with water and place the utested rice on the water surface ( as in u corners ). After some time they will come towards the center.The rice should turn to BLACK,YELLOW,GREEN,BROWN,DARK BROWN in color.
Now bring a pin over the centre the rice will move away.
Remove the pin and they will come to the centre again.
(if riceturns to blue colour then RP is a fake)
(B) WATER TO RICE
Fill ' 1 ' water in a non metallic glass put plain rice in it; they will settle at to bottom.
Now sprinkle some tested ' rice dust' on the water.
The plain rice will stand vertically at the bottom of the glass. They may also rice up and stick to the tested ' RiceDust' and hang below the water surface.
5. COPPER WIRE TEST
Take a thin copper wire(18guage) and wind 2 or 3 turns on the RP and leave theother end hanging out.
Now do the ( INSTANT PULLING TEST) the copper wire should pull rice some as with the RP itself.
6. TORCH TEST
Take a plastic torch running on 2 Pencil cells.remove its front glass and switch it on and hold it at adistance of a bout half inch from the item keep another plastic torch a bout 5 to 6 feet away from the item swich on both the torches together.
YOU MUST ALSO KEEP THE IRON PIN NEAR THE ITEM WHILE DOING THE TORCH TEST.IF THE IRON PIN STICKS TO THE ITEM WHILE DOING THE TORCH TEST, THEN THE ITEM IS FAKE..
NOTE THE TIME TAKEN FOR THE TORCH LIGHT ( NEAR THE ITEM) TO BE COMPLETELY DIMMED. IF IT IS HAPPENING IN JUST A FEW MINUTES, THEN IT IS GOOD .ALSO NOTE THAT THE LIGHT OF THE OTHER TORCH IS STILL BRIGHT OR NOT.
SWITCH OFF THE TORCH AND SWITCH IT ON AFTER ABOUT 2 MINUTES. IF THE LIGHT REMAMINS LOW(DIM) THE TORCH TEST IS SUCCESSFUL..